The history of cells
In 1791, Luigi Galvani, an Italian physiologist, laid out a frog on a metal table prior to dissecting it. As he sliced through it with a metal knife, he observed the twitching of muscles, which he attributed to
animal electricity. Later, when preparing further specimens by hanging them out of doors to dry, he observed muscle contractions if the copper hooks upon which they hung came into contact with iron fence wire. Galvani concluded that electricity resided in the frog's nerve juices, and that the metals in contact allowed the
animal electricity to flow.
A second Italian scientist, Alessandro Volta, disputed this, claiming that the electricity originated within the metal parts of the circuit. The controversy was resolved when, in 1800, Volta produced the first
Voltaic pile; an electric cell. After touching connected pairs of different metals on his tongue to sense the small voltages, Volta constructed the first cell from alternate discs of zinc and silver, separated by absorbent disks soaked in water. He communicated his findings in a letter entitled
On the electricity excited by the mere contact of conducting substances of different kinds.
In their simplest form, modern cells consist of two electrodes of differing materials separated by an ionic solution. When the terminals are connected by a conductor, electrons flow from one side to the other enabling chemical reactions to take place. As these reactions proceed, the chemical store of energy associated with the battery is depleted. Once all the available chemicals have reacted, the cell can no longer shift energy from its store, it is
The amount of energy shifted by the cell as each unit of charge is pushed through the cell (all as a result of the chemical reactions) depends upon the materials used in the cells. The materials most commonly used typically produce a 1.5 volt cell (1.2 volt for certain rechargeable types). A
battery (a number of individual cells connected one after the other in a single line–in series) provides a greater voltage. The packaging of a standard 9 volt battery hides six 1.5 volt cells connected in series (more information about voltage follows in episode 03).
Making a cell
A simple electrical cell can be made with fruit and two metals:
Take 1 citrus fruit (lemons or limes work best). Gently squash the fruit to break the flesh structure without damaging the outer skin.
Insert one clean piece of copper and one clean piece of zinc (each about 5 millimetre by 40 millimetre) into the fruit, close together but not touching.
You now have a cell. Unfortunately the energy available from this cell is rather limited. It's only a small chemical store.
Making a battery
Connect several (five or six) separate fruit cells together, use normal lab wires with crocodile clips to connect the fruits, copper to zinc each time.
Connect a light emitting diode (LED) between the terminals of the first and last fruit. It may light. If not, switch it around as the direction of the electric current in the LED is important.